Angio with automatic stand
Angio with automatic stand

With the stand for the Angio, the ergometer can move up and down over a range of 140 cm. With the stand it is easier to move your arm ergometry setting to another room, because it stands free. Handgrips are standard included.
Overview

Highlights
Easy to operate
For Lode products this means:
- easy to connect
- easy to move around
- easy user interface
Features
1 Watt adjustment
Small adjustment steps
The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.
Specifications

Workload
Electromagnetic "eddy current" braking system yes system that very accurately applies a brake to the ergometer
Dynamic calibration yes continuous calibration during application of workload
Maximum continuous load 750 W the maximum power the ergometer can deliver continuous
Maximum peak load 1000 W the maximum load the ergometer can provide for a short period of time
Minimum load 7 W the minimum load the ergometer can provide
Minimum load increments 1 W the smallest steps with which the load can be added
Minimum rpm independent constant load 30 rpm rpm as from which constant load can be applied
Maximum rpm independent constant load 150 rpm rpm as to which constant load can be applied
Hyperbolic workload control yes control of workload in hyperbolic way
Accuracy
Workload accuracy from 7 to 100 W 3 W accuracy of the ergometer between 7 and 100 Watt
Workload accuracy from 100 to 500 W 3 % accuracy of the ergometer between 100 and 500 Watt
Workload accuracy from 500 to 1000 W 5 % accuracy of the ergometer between 300 and 1000 Watt
User Interface
Manual operation mode yes operate manually
External control unit yes a control unit is connected with a cable to the ergometer
Analog operation mode yes operate analog
Preset protocol operation mode yes operate via preset protocols
Selfdesigned protocol operation mode yes operate via sefdesigned protocols
Terminal operation mode yes operate with an external device
Connectivity
Analog connector yes read-out of ergometer load in an analog way
Dimensions
Product height 223 cm 87.8 inch height of product
Product length 84 cm 33.1 inch length of product
Product width 82 cm 32.3 inch width of the product
Product weight 102 kg 224.9 lbs the weight of the product
Power requirements
115 V AC 50/60 Hz (130 VA) yes operational power
230 V AC 50/60 Hz (130 VA) yes operational power
Standards & Safety
ISO 13485:2003 compliant yes Lode fulfils ISO 13485:2003 requirements
IEC 60601-1/-1-2 yes the product is IEC 60601-1/-1-2 compliant
ISO 9001:2008 compliant yes Lode fulfills ISO 9001: 2008 requirements
Accessories

Support

FAQ

Part number
  • 917904

Brochures
Brochure Arm Ergometry German
Brochure Arm Ergometry Dutch
Brochure Arm Ergometry English


Interfacing protocols
BTL
CareFusion
Cognimed
Cortex
Delmar Reynolds
Edan Instruments Inc.
Enverdis GmbH
ET Medical
GE Healthcare
Labtech
Lode
Med-tronik
Medical Graphics
Mesa Medizintechnik
Mortara
Nihon Kohden
Norav
nSpire Health
Parvomedics
Philips Medical
Progetti
Pulse Biomedical, Inc.
Quinton
Schiller
Seiva
Welch Allyn

1550K
600 USB system
9320K
AT-10
AT-104 PC
AT-110
AT10 Plus
BreezeSuite Software
BTL-08 ECG
Cardiax PC-EKG
Cardio Collect 12
Cardiologic Explorer 12C Ergo
CardioPerfect
Cardiosoft
Cardiosoft MAC 1200 ST
CS200
Cubestress
EC12 R/S
Edan EC-12 EXPRESS
Edan ST-1212 STRESS ECG
Ergolog
GE Case
GE Case 8000
GE Case Basic
GE Case Performance
GE Case Premium
GE Case Value
Lactware Software
Lode Ergometry Manager
MAC 5000
MAC 5500
MasterScreen® ECG / Viasys Oxycon Pro
Metasoft
Multi Control
MyStress system
PC ECG 1200
Q-Stress
QRS-card
StressVue
TM Cardio 1000/2000
TrueOne
X-scribe
XR-200