MRI Ergometer Up/Down
Allows for use in MRI with Up/Down movement

This MRI ergometer is suitable for spectroscopy. The patient is laying in the scanner with the total body. The workload is adjustable up to 100 watt. The zero load is <5 watt at 25 rpm. The MRI ergometer is an ergometer for use during MRI studies. The MRI ergometers workload is controlled with an electronical braking principle especially designed for use in a MRI environment. The moment of inertia is 8,4 kgm2. The MRI ergometer is standard supplied with a control unit and power unit. The standard control unit offers the possibility to read out various parameters like workload, rpm, torque, timer and distance. The power unit is completed with a safety cable for wallfixation. The MRI ergometer can be used for MRI scanners up to 3 Tesla
Overview

Highlights
Comfortable bed for the Patient
- soft bed
- easy step up
- bedcover roll included
- headrests
- handgrips
Features
Silent Design
Low noise
Due to accurate manufacturing and the careful choice of materials the product has an extremely low noise level
Service friendly
Service friendly ergometer
Lode ergometers are very service friendly. In general, total costs for spare parts are so low that they are negligible. Furthermore, most options are so easy to install and firmware is so easy to update that labor costs are minimal. Moreover, the ergometer can be cleaned easily.
Siemens MRI compatibility
The MRI Ergometer can be used in combination with the following Siemens MRI scanners Magnetom Harmony, Symphony, Sonata, Espree, Avanto.
Philips MRI compatible
The ergometer is compatible with various Philips MRI devices
like Philips Intera CV, Achieva 1.5 Tesla & 3.0 Tesla
GE MRI compatible
The ergometer is compatible with various GE MRI devices
like Horizon, Twin Speed
3 Tesla
Up till 3 Tesla
Virtually no interferentie up till 3 Tesla trhough smart constructions and material use
Specifications

Workload
Dynamic calibration yes continuous calibration during application of workload
Electromagnetic "eddy current" braking system yes system that very accurately applies a brake to the ergometer
Fixed torque workload control yes control ergometer in a fixed torque way
Hyperbolic workload control yes control of workload in hyperbolic way
Linear workload control yes control ergometer in a linear way
Maximum continuous load 100 W the maximum power the ergometer can deliver continuous
Maximum peak load 100 W the maximum load the ergometer can provide for a short period of time
Maximum rpm independent constant load 60 rpm rpm as to which constant load can be applied
Minimum load 5 W the minimum load the ergometer can provide
Minimum rpm independent constant load 5 rpm rpm as from which constant load can be applied
Optional heart rate controlled workload yes control the device optionally through a set heartrate
Minimum load increments 1 W the smallest steps with which the load can be added
User Interface
Analog operation mode yes operate analog
External control unit yes a control unit is connected with a cable to the ergometer
Manual operation mode yes operate manually
Preset protocol operation mode yes operate via preset protocols
Selfdesigned protocol operation mode yes operate via sefdesigned protocols
Connectivity
Analog connector yes read-out of ergometer load in an analog way
Dimensions
Product height 50 cm 19.7 inch height of product
Product length 135 cm 53.1 inch length of product
Product weight 37 kg 81.6 lbs the weight of the product
Product width 50 cm 19.7 inch width of the product
Power requirements
115 V AC 50/60 Hz (130 VA) yes operational power
230 V AC 50/60 Hz (130 VA) yes operational power
Standards & Safety
IEC 60601-1 compliant yes the product is IEC 60601-1 compliant
ISO 13485:2003 compliant yes Lode fulfils ISO 13485:2003 requirements
ISO 9001:2008 compliant yes Lode fulfills ISO 9001: 2008 requirements
Accessories

Support

FAQ

Q - Is it possible to use the MRI ergometer with all kind of MRI scanners?

The MRI ergometer is compatible with Siemens, GE and Philips MRI scanners. The type of movement (up-down, push-pull or circular) is depending on the diameter of the scanner and the kind of research (cardiac, spectroscopy etc)

Part number
  • 937903



Interfacing protocols
BTL
CareFusion
Cognimed
Cortex
Delmar Reynolds
Edan Instruments Inc.
Enverdis GmbH
ET Medical
GE Healthcare
Labtech
Lode
Med-tronik
Medical Graphics
Mesa Medizintechnik
Mortara
Nihon Kohden
Norav
nSpire Health
Parvomedics
Philips Medical
Progetti
Pulse Biomedical, Inc.
Quinton
Schiller
Seiva
Welch Allyn

1550K
600 USB system
9320K
AT-10
AT-104 PC
AT-110
AT10 Plus
BreezeSuite Software
BTL-08 ECG
Cardiax PC-EKG
Cardio Collect 12
Cardiologic Explorer 12C Ergo
CardioPerfect
Cardiosoft
Cardiosoft MAC 1200 ST
CS200
Cubestress
EC12 R/S
Edan EC-12 EXPRESS
Edan ST-1212 STRESS ECG
Ergolog
GE Case
GE Case 8000
GE Case Basic
GE Case Performance
GE Case Premium
GE Case Value
Lactware Software
Lode Ergometry Manager
MAC 5000
MAC 5500
MasterScreen® ECG / Viasys Oxycon Pro
Metasoft
Multi Control
MyStress system
PC ECG 1200
Q-Stress
QRS-card
StressVue
TM Cardio 1000/2000
TrueOne
X-scribe
XR-200